PartsTable
Technical Data Sheet
Download PDF

50101-1136 — SEAL,NONMETALLIC ROUND SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

50101-1136: SEAL,NONMETALLIC ROUND SECTION.

The SEAL,NONMETALLIC ROUND SECTION is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, construction: SOLID, aperture_width: 0.623 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN, aperture_length: 1.243 INCHES MINIMUM AND 1.263 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, fabrication_method: SOLID. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-876-4073, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50101-1136
NSN: 5330-00-876-4073
FSC: 5330 — Packing and Gasket Materials
CAGE: 24664 — JONAL LABORATORIES INC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
constructionSOLID
aperture_width0.623 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN
aperture_length1.243 INCHES MINIMUM AND 1.263 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
fabrication_methodSOLID
outside_corner_radius0.031 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
cross-sectional_shape_styleCIRCULAR
cross_section_outside_diameter0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
material_document_and_classificationAMS 3346 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-876-4073
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50101-1136 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3346 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR
•
APERTURE WIDTH: 0.623 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN
•
APERTURE LENGTH: 1.243 INCHES MINIMUM AND 1.263 INCHES MAXIMUM IN
•
CROSS SECTION OUTSIDE DIAMETER: 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.031 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3346 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLECIRCULAR
APERTURE WIDTH0.623 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN
APERTURE LENGTH1.243 INCHES MINIMUM AND 1.263 INCHES MAXIMUM IN
CROSS SECTION OUTSIDE DIAMETER0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.031 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
FABRICATION METHODSOLID
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
9176469Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
R/C 9176439Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 50101-1136?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50101-1136?
50101-1136 is a SEAL,NONMETALLIC ROUND SECTION.
What parts can replace 50101-1136?
There are 2 known substitutes for 50101-1136: 9176469, R/C 9176439. Substitute compatibility should be verified for your specific system.
What is the NSN for 50101-1136?
50101-1136 is cataloged in the U.S. Government catalog under NSN 5330-00-876-4073. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50101-1136

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.