PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50100S3500-009863ALTPC53
50100S3500-009863ALTPC53 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include center_hole_diameter: 2.062 INCHES NOMINAL IN, cross-sectional_height: 0.366 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN, cross-sectional_thickness: 0.203 INCHES NOMINAL IN, cross-sectional_shape_style: CUP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-3965, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50100S3500-009863ALTPC53
NSN: 5330-00-171-3965
FSC: 5330
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
center_hole_diameter2.062 INCHES NOMINAL IN
cross-sectional_height0.366 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
cross-sectional_thickness0.203 INCHES NOMINAL IN
cross-sectional_shape_styleCUP
NSN5330-00-171-3965
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50100S3500-009863ALTPC53 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
CROSS-SECTIONAL HEIGHT: 0.366 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.203 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLECUP
CROSS-SECTIONAL HEIGHT0.366 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.062 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.203 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
70815Interchangeable
interchangeable cross-reference
interchangeable
2110-0250Interchangeable
interchangeable cross-reference
interchangeable
C685915-3Interchangeable
interchangeable cross-reference
interchangeable
PT07P-14-5PInterchangeable
interchangeable cross-reference
interchangeable
MS3474L14-5PInterchangeable
interchangeable cross-reference
interchangeable
NAVYX2079PC99Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50100S3500-009863ALTPC53?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50100S3500-009863ALTPC53?
50100S3500-009863ALTPC53 is a RETAINER,PACKING.
What parts can replace 50100S3500-009863ALTPC53?
There are 9 known substitutes for 50100S3500-009863ALTPC53: 70815, 2110-0250, C685915-3 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50100S3500-009863ALTPC53?
50100S3500-009863ALTPC53 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-3965. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50100S3500-009863ALTPC53

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026