PartsTable
Technical Data Sheet
Download PDF

5010-73 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5010-73: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, temp_rating: -35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.682 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN, center_hole_diameter: 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-007-7085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5010-73
NSN: 5331-01-007-7085
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
temp_rating-35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter0.682 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
center_hole_diameter0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-01-007-7085
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5010-73 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.682 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
TECHNICAL CHARACTERISTICS
TEMP RATING-35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.682 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR
SUBSTITUTES & CROSS-REFERENCES 5
5010-53Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
P38-433-3PC57Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6227-10C557-7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2-112C557-7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2-112C557-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5010-73?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5010-73?
5010-73 is a O-RING.
What parts can replace 5010-73?
There are 5 known substitutes for 5010-73: 5010-53, P38-433-3PC57, 6227-10C557-7 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5010-73?
5010-73 is cataloged in the U.S. Government catalog under NSN 5331-01-007-7085. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5010-73