USB extension cable with a male type-A connector at one end and a female type-A connector at the other. Remember that USB cables can only be extended to seven metres unless you use an amplified cable. Key specifications include material: STEEL OVERALL, bore_diameter: 0.7500 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, shaft_end_type: OPEN, first_end_style: ROUND, flange_thickness: 0.1250 INCHES NOMINAL IN.
This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6680-00-676-0735, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | STEEL OVERALL |
| bore_diameter | 0.7500 INCHES NOMINAL IN |
| alignment_type | SELF-ALIGNING |
| shaft_end_type | OPEN |
| first_end_style | ROUND |
| flange_thickness | 0.1250 INCHES NOMINAL IN |
| housing_diameter | 2.7500 INCHES NOMINAL IN |
| second_end_style | SQUARE W/THRU HOLE |
| special_features | RUBBER MOUNTING GROMMETS |
| mounting_hole_type | ROUND, UNTHREADED |
| pin_overall_length | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN |
| bolt_circle_diameter | 3.3750 INCHES NOMINAL IN |
| NSN | 6680-00-676-0735 |
| MEASUREMENT RANGE | +50.0 TO 200.0 GALLONS PER MINUTE |
| FSC APPLICATION DATA | TRANSMITTER,RATE OF FLOW,EXCEPT ENGINE |
| VOLTAGE RATING | 28.0 VOLTS NOMINAL |
| MECHANICAL CONNECTION SIZE | 1.781 IN. ID BY 3 IN. SQ IN |
| MECHANICAL CONNECTION QUANTITY | 2 |
| ACTUATION METHOD | MAGNETIC AND METER ELEMENT |
| ELECTRICAL CONNECTION QUANTITY | 1 |
| MOUNTING METHOD | HOLE |
| OVERALL THICKNESS | 5.070 INCHES NOMINAL IN |
| MECHANICAL CONNECTION TYPE | FLANGE |