PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5007-119
5007-119 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, thread_length: 0.152 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, screw_material: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302, fastener_length: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-282-2289, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5007-119
NSN: 5305-00-282-2289
FSC: 5305
CAGE: 26344 — NEW HAVEN MFG CORP (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
thread_length0.152 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302
fastener_length0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch56
NSN5305-00-282-2289
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5007-119 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 56
•
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 4TH MATERIAL RESPONSE
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
SCREW SURFACE TREATMENT: PASSIVATE
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH56
FASTENER LENGTH0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 4TH MATERIAL RESPONSE
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SCREW SURFACE TREATMENTPASSIVATE
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
NOMINAL THREAD DIAMETER0.086 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
MS51559-2Interchangeable
interchangeable cross-reference
interchangeable
284-615-0203Interchangeable
interchangeable cross-reference
interchangeable
10125475Interchangeable
interchangeable cross-reference
interchangeable
AN505C2-3Interchangeable
Same NIIN cross-reference
interchangeable
0410-093Interchangeable
Same NIIN cross-reference
interchangeable
905275-9Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5007-119?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5007-119?
5007-119 is a SCREW,MACHINE.
What parts can replace 5007-119?
There are 8 known substitutes for 5007-119: MS51559-2, 284-615-0203, 10125475 and 5 more. Substitute compatibility should be verified for your specific system.
Is 5007-119 still available?
5007-119 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5007-119

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026