PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50064PC7
50064PC7 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.500 INCHES NOMINAL IN, overall_height: 0.219 INCHES NOMINAL IN, outside_diameter: 1.125 INCHES NOMINAL IN, style_designator: SPRING TENSION, material_thickness: 0.016 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-275-6697, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50064PC7
NSN: 5310-00-275-6697
FSC: 5310
CAGE: 01843 — AMBAC INTERNATIONAL CORPORATION DIV AMBAC INTERNATIONAL (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.500 INCHES NOMINAL IN
overall_height0.219 INCHES NOMINAL IN
outside_diameter1.125 INCHES NOMINAL IN
style_designatorSPRING TENSION
material_thickness0.016 INCHES NOMINAL IN
NSN5310-00-275-6697
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 50064PC7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SPRING TENSION
•
HOLE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.219 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
STYLE DESIGNATORSPRING TENSION
HOLE DIAMETER0.500 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
9413168Interchangeable
interchangeable cross-reference
interchangeable
706046XInterchangeable
interchangeable cross-reference
interchangeable
74161Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50064PC7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50064PC7?
50064PC7 is a WASHER,SPRING TENSION.
What parts can replace 50064PC7?
There are 3 known substitutes for 50064PC7: 9413168, 706046X, 74161. Substitute compatibility should be verified for your specific system.
What is the NSN for 50064PC7?
50064PC7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-275-6697. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50064PC7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026