PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50063S
50063S ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.469 INCHES NOMINAL IN, housing_bore_diameter: 2.441 INCHES NOMINAL IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 1.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-601-5299, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50063S
NSN: 5330-00-601-5299
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.469 INCHES NOMINAL IN
housing_bore_diameter2.441 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.500 INCHES NOMINAL IN
NSN5330-00-601-5299
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50063S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 2.441 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.500 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
MATERIAL: STEEL CASE
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
HOUSING BORE DIAMETER2.441 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.469 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
641522Interchangeable
interchangeable cross-reference
interchangeable
1604-2Interchangeable
interchangeable cross-reference
interchangeable
722226-2Interchangeable
interchangeable cross-reference
interchangeable
E10365Interchangeable
interchangeable cross-reference
interchangeable
15082Interchangeable
interchangeable cross-reference
interchangeable
TICS.08.10495Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50063S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50063S?
50063S is a SEAL,PLAIN ENCASED.
What parts can replace 50063S?
There are 6 known substitutes for 50063S: 641522, 1604-2, 722226-2 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50063S?
50063S is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-601-5299. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50063S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026