PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50063
50063 ✓ Verified by PartsTable
Sandberg · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

This adapter is suitable if you have a mouse with a 9-pin COM connector (older standard) and would like to plug it into the small round PS/2 port in your computer. Note however that not all COM-type mice can be plugged into a PS/2 port using the adapter only mice designed for it will function through the adapter. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-2948, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
50063
NSN: 5310-00-058-2948
FSC: 5310
CAGE: 26344 — NEW HAVEN MFG CORP (USA)
SPECIFICATIONS
operation_methodHYDRAULIC
protective_shield_typeDUST
nominal_extended_length20.875 INCHES IN
nominal_compressed_length12.375 INCHES IN
piston_end_connection_styleBEARING
cylinder_end_connection_styleBEARING
NSN5310-00-058-2948
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 50063 · Sandberg ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: C CLASS AND 1 STYLE
•
HOLE DIAMETER: 0.103 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 304 OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.188 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATAC CLASS AND 1 STYLE
HOLE DIAMETER0.103 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 304 OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
OUTSIDE DIAMETER0.188 INCHES MAXIMUM IN
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY MATERIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
12Z3018-25Interchangeable
interchangeable cross-reference
interchangeable
FFW84CLASSCSTYLE1Interchangeable
interchangeable cross-reference
interchangeable
852961Interchangeable
interchangeable cross-reference
interchangeable
G221439-21Interchangeable
interchangeable cross-reference
interchangeable
616938PC4Interchangeable
interchangeable cross-reference
interchangeable
12Z3018PC27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50063?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50063?
50063 is a SPIDER,UNIVERSAL JOINT,VEHICULAR manufactured by Sandberg.
What parts can replace 50063?
There are 23 known substitutes for 50063: 12Z3018-25, FFW84CLASSCSTYLE1, 852961 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50063?
50063 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-2948. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50063

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026