PartsTable / COMPONENT / 50060680
50060680
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include width: 0.546 INCHES NOMINAL IN, height: 1.125 INCHES NOMINAL IN, length: 0.875 INCHES NOMINAL IN, diameter: 0.343 INCHES NOMINAL IN, material: STEEL OVERALL, pawl_type: OFFSET. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-622-9667, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
50060680
NSN: 5340-00-622-9667 FSC: 5340 CAGE: I9021 — NSPA-LD/HAWK
SPECIFICATIONS
width 0.546 INCHES NOMINAL IN height 1.125 INCHES NOMINAL IN length 0.875 INCHES NOMINAL IN diameter 0.343 INCHES NOMINAL IN material STEEL OVERALL pawl_type OFFSET knob_length 0.484 INCHES NOMINAL IN pawl_swing_angle 180.0 DEGREES NOMINAL special_features HOLE QUANTITY:2 style_designator KNURLED surface_treatment CADMIUM OVERALL operational_direction RIGHT-HAND NSN 5340-00-622-9667
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 50060680
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MOUNTING HOLE DIAMETER: 0.128 INCHES NOMINAL IN
• PAWL ACTUATION METHOD: KNOB
• SURFACE TREATMENT: CADMIUM OVERALL
• STYLE DESIGNATOR: KNURLED
• DIAMETER: 0.343 INCHES NOMINAL IN
• OPERATIONAL DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE DIAMETER 0.128 INCHES NOMINAL IN PAWL ACTUATION METHOD KNOB SURFACE TREATMENT CADMIUM OVERALL MATERIAL STEEL OVERALL STYLE DESIGNATOR KNURLED DIAMETER 0.343 INCHES NOMINAL IN OPERATIONAL DIRECTION RIGHT-HAND PAWL TYPE OFFSET LENGTH 0.875 INCHES NOMINAL IN PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END 0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
43110 Upgraded Successor successor cross-reference
successor
43130 Interchangeable Tweezers,craftsman's
interchangeable
EROP3CSA Interchangeable Tweezers,craftsman's
interchangeable
26445 Interchangeable interchangeable cross-reference
interchangeable
672-1313-00 Interchangeable interchangeable cross-reference
interchangeable
A15821 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 50060680?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50060680?
50060680 is a FASTENER,PAWL.
What parts can replace 50060680?
There are 18 known substitutes for 50060680: 43110, 43130, EROP3CSA and 15 more. Substitute compatibility should be verified for your specific system.
Is 50060680 still available?
50060680 is currently cancelled.
Request a Quote — 50060680