PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5006-3
5006-3 ✓ Verified by PartsTable
Sandberg · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

This adapter is suitable if you have a mouse with a 9-pin COM connector (older standard) and would like to plug it into the small round PS/2 port in your computer. Note however that not all COM-type mice can be plugged into a PS/2 port using the adapter only mice designed for it will function through the adapter. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-2948, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
5006-3
NSN: 5310-00-058-2948
FSC: 5310
CAGE: 26344 — NEW HAVEN MFG CORP (USA)
SPECIFICATIONS
operation_methodHYDRAULIC
protective_shield_typeDUST
nominal_extended_length20.875 INCHES IN
nominal_compressed_length12.375 INCHES IN
piston_end_connection_styleBEARING
cylinder_end_connection_styleBEARING
NSN5310-00-058-2948
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5006-3 · Sandberg ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: C CLASS AND 1 STYLE
•
HOLE DIAMETER: 0.103 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 304 OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.188 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATAC CLASS AND 1 STYLE
HOLE DIAMETER0.103 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 304 OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
OUTSIDE DIAMETER0.188 INCHES MAXIMUM IN
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY MATERIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
12Z3018-25Interchangeable
interchangeable cross-reference
interchangeable
FFW84CLASSCSTYLE1Interchangeable
interchangeable cross-reference
interchangeable
852961Interchangeable
interchangeable cross-reference
interchangeable
G221439-21Interchangeable
interchangeable cross-reference
interchangeable
616938PC4Interchangeable
interchangeable cross-reference
interchangeable
12Z3018PC27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5006-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5006-3?
5006-3 is a SPIDER,UNIVERSAL JOINT,VEHICULAR manufactured by Sandberg.
What parts can replace 5006-3?
There are 23 known substitutes for 5006-3: 12Z3018-25, FFW84CLASSCSTYLE1, 852961 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5006-3?
5006-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-2948. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5006-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026