PartsTable
Technical Data Sheet
Download PDF

500486 — WIRING HARNESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

500486: WIRING HARNESS.

The WIRING HARNESS is a the manufacturer industrial component. Key specifications include width: 1.125 INCHES NOMINAL IN, length: 1.125 INCHES NOMINAL IN, material: STEEL, corner_radius: 0.154 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, hole_diameter: 0.154 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, body_thickness: 0.046 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-039-8409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500486
NSN: 5340-00-039-8409
NIINs: 000398409, 013089401
FSC: 5340 — Hardware, Commercial
CAGE: 94580 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE-MINNEAPOLIS (USA)
SPECIFICATIONS
width1.125 INCHES NOMINAL IN
length1.125 INCHES NOMINAL IN
materialSTEEL
corner_radius0.154 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
hole_diameter0.154 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
body_thickness0.046 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
round_conductor_size14 AWG SINGLE CONDUCTOR
securing_device_typeTHREADED FASTENER
peripheral_shape_styleRECTANGLE, FOUR HOLES
cross-sectional_shape_styleFLAT
mounting_opening_shape_styleUNTHREADED HOLE
distance_between_holes_along_width0.810 INCHES MINIMUM AND 0.814 INCHES MAXIMUM IN
NSN5340-00-039-8409
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 500486 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.156 INCHES NOMINAL IN
•
CORNER RADIUS: 0.154 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
•
LENGTH: 1.125 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 0.810 INCHES MINIMUM AND 0.814 INCHES MAXIMUM IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 0.810 INCHES MINIMUM AND 0.814 INCHES MAXIMUM IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-636,COND 2 FED SPEC SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.156 INCHES NOMINAL IN
CORNER RADIUS0.154 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
LENGTH1.125 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG LENGTH0.810 INCHES MINIMUM AND 0.814 INCHES MAXIMUM IN
DISTANCE BETWEEN HOLES ALONG WIDTH0.810 INCHES MINIMUM AND 0.814 INCHES MAXIMUM IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-636,COND 2 FED SPEC SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLEFLAT
SECURING DEVICE TYPETHREADED FASTENER
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.156 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 500486?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500486?
500486 is a WIRING HARNESS.
What is the NSN for 500486?
500486 is cataloged in the U.S. Government catalog under NSN 5340-00-039-8409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500486

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.