PartsTable
Technical Data Sheet
Download PDF

5004-2 — BAR,CONNECTING,TELETYPEWRITER

✓ Government record, cited
Verbatim · MRO · MRO_GENERAL
PRODUCT OVERVIEW

5004-2: BAR,CONNECTING,TELETYPEWRITER.

By choosing Verbatim's range of cartridges, you can be absolutely confident that the appropriate model will work perfectly with its compatible printer, and furthermore the cost per page of printing can be up to 40% less than using the equivalent from the original equipment manufacturer (OEM). Benefits from Verbatim Toner Cartridges: - Compatibility with supported OEM laser printers Compatibility Guide. - Cartridges deliver an equal or better performance than the original brand cartridge.

- Quality assurance from a world leader in design, manufacturing and marketing. - Lower cost per page than available from any other cartridge supplier. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-045-7494, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5004-2
NSN: 5310-00-045-7494
NIINs: 000457494, 001128014, 002286695, 012656081, 014338692, 016213425
FSC: 5310 — Nuts and Washers
CAGE: 04638 — TRANSDIGM INC (USA)
SPECIFICATIONS
fsc_application_dataTELETYPE AND FACSIMILE EQUIPMENT
general_characteristics_item_descriptionSTEEL; 3.750 IN. LG; 0.344 IN. W; 0.031 IN. H IN
NSN5310-00-045-7494
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5004-2 · Verbatim ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.688 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
HOLE CONFIGURATION STYLE: CONFIGURATION H
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NUT HEIGHT: 0.250 INCHES NOMINAL IN
•
DRILLED HOLE DIAMETER: 0.039 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.688 INCHES NOMINAL IN
THREAD SERIESUNF
HOLE CONFIGURATION STYLECONFIGURATION H
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NUT HEIGHT0.250 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.039 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 5004-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5004-2?
5004-2 is a BAR,CONNECTING,TELETYPEWRITER manufactured by Verbatim. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 5004-2?
5004-2 is cataloged in the U.S. Government catalog under NSN 5310-00-045-7494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5004-2