PartsTable
Technical Data Sheet
Download PDF

500342-1 — DUMMY MINE,UNDERWATER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

500342-1: DUMMY MINE,UNDERWATER.

The DUMMY MINE,UNDERWATER is a the manufacturer industrial component. Key specifications include material: PLASTIC OR RUBBER OR LEATHER OR FIBER OVERALL, hole_diameter: 0.205 INCHES MINIMUM AND 0.229 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.782 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN, overall_length: 1.485 INCHES MINIMUM AND 1.545 INCHES MAXIMUM IN, special_features: CONTAINS NON-ASBESTOS MATERIAL, aperture_diameter: 0.454 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-124-6613, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500342-1
NSN: 5306-01-124-6613
NIINs: 011246613, 012065924, 013874239
FSC: 5306 — Bolts
CAGE: 21562 — GENERAL DYNAMICS OTS (AEROSPACE), INC. DBA GENERAL DYNAMICS ORDINANCE AND TACTICAL SYSTEMS DIV SEATTLE OPERATIONS (USA)
SPECIFICATIONS
materialPLASTIC OR RUBBER OR LEATHER OR FIBER OVERALL
hole_diameter0.205 INCHES MINIMUM AND 0.229 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.782 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN
overall_length1.485 INCHES MINIMUM AND 1.545 INCHES MAXIMUM IN
special_featuresCONTAINS NON-ASBESTOS MATERIAL
aperture_diameter0.454 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN
bolt_hole_quantity2
cross-sectional_thickness0.047 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
material_document_and_classificationMIL-G-12803 TY F712400E45-6 MIL SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
NSN5306-01-124-6613
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 500342-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.130 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.515 INCHES NOMINAL IN
•
SHOULDER LENGTH: 0.115 INCHES NOMINAL FIRST SHOULDER IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SHOULDER DIAMETER: 0.240 INCHES MINIMUM AND 0.244 INCHES MAXIMUM FIRST SHOULDER IN
•
THREAD LENGTH: 0.376 INCHES MINIMUM IN
•
SHOULDER SHAPE: ROUND FIRST SHOULDER
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR ASTMA582 ASSN STD 2ND MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.130 INCHES NOMINAL IN
FASTENER LENGTH0.515 INCHES NOMINAL IN
SHOULDER LENGTH0.115 INCHES NOMINAL FIRST SHOULDER IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SHOULDER DIAMETER0.240 INCHES MINIMUM AND 0.244 INCHES MAXIMUM FIRST SHOULDER IN
THREAD LENGTH0.376 INCHES MINIMUM IN
SHOULDER SHAPEROUND FIRST SHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR ASTMA582 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 1
5306PL0894764Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 500342-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500342-1?
500342-1 is a DUMMY MINE,UNDERWATER.
What parts can replace 500342-1?
There is 1 known substitute for 500342-1: 5306PL0894764. Substitute compatibility should be verified for your specific system.
What is the NSN for 500342-1?
500342-1 is cataloged in the U.S. Government catalog under NSN 5306-01-124-6613. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500342-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.