PartsTable
Technical Data Sheet
Download PDF

500332 — STOP LINK AND BAR ASSEMBLY

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

500332: STOP LINK AND BAR ASSEMBLY.

The STOP LINK AND BAR ASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL, special_features: USED ON AN/MPQ-15, mounting_hole_type_and_quantity: 2 PLAIN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-021-8597, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500332
NSN: 5310-00-021-8597
NIINs: 000218597, 003054775, 007744080, 012215393
FSC: 5310 — Nuts and Washers
CAGE: 02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
materialSTEEL
special_featuresUSED ON AN/MPQ-15
mounting_hole_type_and_quantity2 PLAIN
NSN5310-00-021-8597
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 500332 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
NUT HEIGHT: 0.398 INCHES MINIMUM AND 0.415 INCHES MAXIMUM IN
•
NUT STYLE: CASTELLATED, HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NONDEFINITIVE SPEC/STD DATAA TYPE
NUT HEIGHT0.398 INCHES MINIMUM AND 0.415 INCHES MAXIMUM IN
NUT STYLECASTELLATED, HEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH24
SUBSTITUTES & CROSS-REFERENCES 2
218597Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFB571TYPEAReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 500332?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500332?
500332 is a STOP LINK AND BAR ASSEMBLY.
What parts can replace 500332?
There are 2 known substitutes for 500332: 218597, FFB571TYPEA. Substitute compatibility should be verified for your specific system.
What is the NSN for 500332?
500332 is cataloged in the U.S. Government catalog under NSN 5310-00-021-8597. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500332

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.