5002601-007 — PIN,STRAIGHT,HEADED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

5002601-007: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.500 INCHES NOMINAL IN, diameter: 2.748 INCHES MINIMUM IN, material: STEEL COMP 4140 OVERALL, head_style: ROUND W/WRENCH FLATS, chamfer_length: 16.060 INCHES MINIMUM IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-515-1278, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5002601-007

NSN: 5315-01-515-1278
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 0SZB6 — MANITEX INC (USA)

SPECIFICATIONS

height	0.500 INCHES NOMINAL IN
diameter	2.748 INCHES MINIMUM IN
material	STEEL COMP 4140 OVERALL
head_style	ROUND W/WRENCH FLATS
chamfer_length	16.060 INCHES MINIMUM IN
style_designator	STRAIGHT
pin_chamfer_angle	4.5 RADIANS NOMINAL
pin_head_diameter	3.760 INCHES NOMINAL IN
under_head_length	1.370 INCHES NOMINAL IN
width_across_flats	4.500 INCHES NOMINAL IN
end_item_identification	2320014652260
NSN	5315-01-515-1278

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 4.500 INCHES NOMINAL IN

•

CHAMFER LENGTH: 16.060 INCHES MINIMUM IN

•

UNDER HEAD LENGTH: 1.370 INCHES NOMINAL IN

•

PIN CHAMFER ANGLE: 4.5 RADIANS NOMINAL

•

STYLE DESIGNATOR: STRAIGHT

•

PIN HEAD DIAMETER: 3.760 INCHES NOMINAL IN

•

DIAMETER: 2.748 INCHES MINIMUM IN

•

HEAD STYLE: ROUND W/WRENCH FLATS

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	4.500 INCHES NOMINAL IN
CHAMFER LENGTH	16.060 INCHES MINIMUM IN
UNDER HEAD LENGTH	1.370 INCHES NOMINAL IN
PIN CHAMFER ANGLE	4.5 RADIANS NOMINAL
STYLE DESIGNATOR	STRAIGHT
PIN HEAD DIAMETER	3.760 INCHES NOMINAL IN
DIAMETER	2.748 INCHES MINIMUM IN
HEAD STYLE	ROUND W/WRENCH FLATS
HEIGHT	0.500 INCHES NOMINAL IN
SPECIAL FEATURES	PIN MAY BE CENTER DRILLED FOR PLATING. PLATING PIN BODY HARD CHROMED ANDPOLISHED THICKNESS 0.001-0.002 INCH SURFACE HARDNESS ROCKWELL C 50 MIN. PLATING END PLATE AND PIN EDGE XYLAN COATED 5251/621 SILVER DRY FILM THICKNESS 0.70 TO 0.90 MIL IN

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

1HA2Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 5002601-007?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5002601-007?

5002601-007 is a PIN,STRAIGHT,HEADED.

What parts can replace 5002601-007?

There is 1 known substitute for 5002601-007: 1HA2. Substitute compatibility should be verified for your specific system.

What is the NSN for 5002601-007?

5002601-007 is cataloged in the U.S. Government catalog under NSN 5315-01-515-1278. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5002601-007 — PIN,STRAIGHT,HEADED

Request a Quote — 5002601-007