PartsTable
Technical Data Sheet
Download PDF

500255 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

500255: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.2812 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-297-6433, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500255
NSN: 5330-00-297-6433
NIINs: 002976433, 007369477, 014567963
FSC: 5330 — Packing and Gasket Materials
CAGE: 00000
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.2812 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter0.7500 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN5330-00-297-6433
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 500255 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
•
HOUSING BORE DIAMETER: 3.498 INCHES MINIMUM AND 3.502 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
SEAL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
HOUSING BORE DIAMETER3.498 INCHES MINIMUM AND 3.502 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
COLORBLACK
ACCOMMODATED SHAFT DIAMETER2.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
208305Reference document
Same NSN cross-reference
Reference document — Secondary reference
55093Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 500255?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500255?
500255 is a BEARING,BALL,ANNULAR.
What parts can replace 500255?
There are 2 known substitutes for 500255: 208305, 55093. Substitute compatibility should be verified for your specific system.
What is the NSN for 500255?
500255 is cataloged in the U.S. Government catalog under NSN 5330-00-297-6433. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500255