PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 500241
500241 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: DECAL-SAFETY CHAIN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-2830, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500241
NSN: 5330-00-291-2830
FSC: 5330
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyDECAL-SAFETY CHAIN
NSN5330-00-291-2830
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 500241 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
•
SEAL WIDTH: 0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
SEAL WIDTH0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
HOUSING BORE DIAMETER1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
100 28 H BInterchangeable
interchangeable cross-reference
interchangeable
500 28 HInterchangeable
interchangeable cross-reference
interchangeable
6-0401-53-0-0320Interchangeable
interchangeable cross-reference
interchangeable
500241Interchangeable
interchangeable cross-reference
interchangeable
480028Interchangeable
interchangeable cross-reference
interchangeable
0500241Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 500241?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500241?
500241 is a SEAL,PLAIN ENCASED.
What parts can replace 500241?
There are 9 known substitutes for 500241: 100 28 H B, 500 28 H, 6-0401-53-0-0320 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 500241?
500241 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-2830. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500241

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026