PartsTable
Technical Data Sheet
500208 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include width: 10.000 INCHES NOMINAL IN, length: 12.000 INCHES NOMINAL IN, material: PLASTIC POLYESTER, film_type: STILL PICTURE, base_color: CLEAR, usage_form: SHEET. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-9885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500208
NSN: 5330-00-297-9885
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width10.000 INCHES NOMINAL IN
length12.000 INCHES NOMINAL IN
materialPLASTIC POLYESTER
film_typeSTILL PICTURE
base_colorCLEAR
usage_formSHEET
film_subtypeCAMERA
emulsion_typeBLACK AND WHITE
precious_materialSILVER
reproduction_typePRINT
emulsion_sensitivityARTIFICIAL LIGHT
base_material_thickness0.0040 INCHES NOMINAL IN
NSN5330-00-297-9885
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 500208 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ACCOMMODATED SHAFT DIAMETER: 5.125 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
SEALING ELEMENT STYLE: ANGULAR
SEAL WIDTH: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
HOUSING BORE DIAMETER: 6.3735 INCHES MINIMUM AND 6.3765 INCHES MAXIMUM IN
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER5.125 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
HOUSING BORE DIAMETER6.3735 INCHES MINIMUM AND 6.3765 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
HC-4Interchangeable
interchangeable cross-reference
interchangeable
500208Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 500208?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500208?
500208 is a RELAY,ELECTROMAGNETIC.
What parts can replace 500208?
There are 3 known substitutes for 500208: HC-4, 500208, 00044. Substitute compatibility should be verified for your specific system.
What is the NSN for 500208?
500208 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-9885. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500208