PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5001598
5001598 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.219 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-680-7504, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5001598
NSN: 5310-00-680-7504
FSC: 5310
CAGE: 001JK — EMBRAER S.A. (BRA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.219 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
locking_featurePREVAILING TORQUE ALL METAL DESIGN
special_featuresINTERNAL WRENCHING
thread_directionRIGHT-HAND
countersink_angle120.0 DEGREES NOMINAL NUT
surface_treatmentCADMIUM OVERALL
NSN5310-00-680-7504
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5001598 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NUT STYLE: HEXAGON
•
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 120.0 DEGREES NOMINAL NUT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
NOMINAL THREAD SIZE0.250 INCHES IN
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
SPECIAL FEATURESINTERNAL WRENCHING
THREAD DIRECTIONRIGHT-HAND
NUT STYLEHEXAGON
WIDTH ACROSS FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
COUNTERSINK ANGLE120.0 DEGREES NOMINAL NUT
NUT HEIGHT0.219 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
H104Interchangeable
interchangeable cross-reference
interchangeable
L-4-18-9-MInterchangeable
interchangeable cross-reference
interchangeable
433-1792Interchangeable
interchangeable cross-reference
interchangeable
418212-40Interchangeable
interchangeable cross-reference
interchangeable
811-473-011Interchangeable
interchangeable cross-reference
interchangeable
960-48Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5001598?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5001598?
5001598 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace 5001598?
There are 15 known substitutes for 5001598: H104, L-4-18-9-M, 433-1792 and 12 more. Substitute compatibility should be verified for your specific system.
Is 5001598 still available?
5001598 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5001598

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026