PartsTable
Technical Data Sheet
PartsTable / MRO / 50015
50015 ✓ Verified by PartsTable
Trefl · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: RUBBER SYNTHETIC, nut_style: HEXAGON, body_style: CYLINDRICAL BUSHING MOUNTED, case_style: SQUARE, nut_height: 0.344 INCHES NOMINAL IN, seal_width: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-4169, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 50015
NSN: 5330-00-154-4169
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
nut_styleHEXAGON
body_styleCYLINDRICAL BUSHING MOUNTED
case_styleSQUARE
nut_height0.344 INCHES NOMINAL IN
seal_width0.375 INCHES NOMINAL IN
body_length0.625 INCHES MAXIMUM IN
shaft_styleROUND
shaft_length0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
thread_class3B
actuator_typeSINGLE SHAFT
body_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
NSN5330-00-154-4169
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50015 MFR: Trefl ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.531 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.375 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALLEATHER SEALING ELEMENT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.531 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
50015Interchangeable
interchangeable cross-reference
interchangeable
10146Interchangeable
interchangeable cross-reference
interchangeable
36415HAInterchangeable
interchangeable cross-reference
interchangeable
5.00-15Interchangeable
interchangeable cross-reference
interchangeable
ZZ-T-1619Interchangeable
interchangeable cross-reference
interchangeable
X/GP2/CLF-2/TYBB/5.00-15/BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50015?
50015 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Trefl. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50015?
There are 18 known substitutes for 50015: 50015, 10146, 36415HA and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50015?
50015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-4169. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026