PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5001-846
5001-846 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include width: 4.500 INCHES NOMINAL IN, height: 3.500 INCHES NOMINAL IN, style_designator: T-HANDLE, operational_direction: LEFT-HAND OR RIGHT-HAND, pawl_actuation_method: GRIP HANDLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-207-9827, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5001-846
NSN: 5340-01-207-9827
FSC: 5340
CAGE: 05869 — RAYTHEON COMPANY DIV RMD STRATEGIC (USA)
SPECIFICATIONS
width4.500 INCHES NOMINAL IN
height3.500 INCHES NOMINAL IN
style_designatorT-HANDLE
operational_directionLEFT-HAND OR RIGHT-HAND
pawl_actuation_methodGRIP HANDLE
NSN5340-01-207-9827
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5001-846 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEIGHT: 3.500 INCHES NOMINAL IN
•
OPERATIONAL DIRECTION: LEFT-HAND OR RIGHT-HAND
•
WIDTH: 4.500 INCHES NOMINAL IN
•
PAWL ACTUATION METHOD: GRIP HANDLE
•
STYLE DESIGNATOR: T-HANDLE
TECHNICAL CHARACTERISTICS (FLIS)
HEIGHT3.500 INCHES NOMINAL IN
OPERATIONAL DIRECTIONLEFT-HAND OR RIGHT-HAND
WIDTH4.500 INCHES NOMINAL IN
PAWL ACTUATION METHODGRIP HANDLE
STYLE DESIGNATORT-HANDLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
100R96-212FInterchangeable
interchangeable cross-reference
interchangeable
97-212Interchangeable
interchangeable cross-reference
interchangeable
96-212Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5001-846?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5001-846?
5001-846 is a FASTENER,PAWL.
What parts can replace 5001-846?
There are 3 known substitutes for 5001-846: 100R96-212F, 97-212, 96-212. Substitute compatibility should be verified for your specific system.
What is the NSN for 5001-846?
5001-846 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-207-9827. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5001-846

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026