PartsTable
Technical Data Sheet
5001-169 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.530 INCHES NOMINAL IN, body_diameter: 0.218 INCHES NOMINAL IN, reliability_indicator: NOT ESTABLISHED, cross-sectional_height: 0.139 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-164-5266, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 5001-169
NSN: 5331-00-164-5266
FSC: 5331 — O-RING
CAGE: 0B9R9 — MEGGITT AIRCRAFT BRAKING SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length0.530 INCHES NOMINAL IN
body_diameter0.218 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
cross-sectional_height0.139 INCHES NOMINAL IN
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
tolerance_range_per_section-1.00 TO 1.00 PERCENT SINGLE SECTION
schematic_diagram_designatorNO COMMON OR GROUNDED ELECTRODE(S)
capacitance_value_per_section0.033 MICROFARADS SINGLE SECTION
nonderated_continuous_voltage_rating_and_type_per_section50.0 DC SINGLE SECTION
NSN5331-00-164-5266
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5001-169 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER
CROSS-SECTIONAL HEIGHT: 0.139 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER
CROSS-SECTIONAL HEIGHT0.139 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
121-001Interchangeable
interchangeable cross-reference
interchangeable
5001-169Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5001-169?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5001-169?
5001-169 is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5001-169?
There are 2 known substitutes for 5001-169: 121-001, 5001-169. Substitute compatibility should be verified for your specific system.
What is the NSN for 5001-169?
5001-169 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-164-5266. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5001-169