PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5000S5101F841218TYPE4 NON-ASBEST
5000S5101F841218TYPE4 NON-ASBEST ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET,SPIRAL WOUND is a the manufacturer industrial component. Key specifications include aperture_width: 2.781 INCHES NOMINAL IN, aperture_length: 3.406 INCHES NOMINAL IN, special_features: CONTAINS NON-ASBESTOS MATERIAL, style_designator: OVAL, bearing_surface_width: 0.156 INCHES NOMINAL IN, cross-sectional_thickness: 0.175 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-379-9617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5000S5101F841218TYPE4 NON-ASBEST
NSN: 5330-01-379-9617
FSC: 5330
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
aperture_width2.781 INCHES NOMINAL IN
aperture_length3.406 INCHES NOMINAL IN
special_featuresCONTAINS NON-ASBESTOS MATERIAL
style_designatorOVAL
bearing_surface_width0.156 INCHES NOMINAL IN
cross-sectional_thickness0.175 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL WINDING W/ SOFT FILLER
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-379-9617
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5000S5101F841218TYPE4 NON-ASBEST MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SURFACE WIDTH: 0.156 INCHES NOMINAL IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
•
APERTURE WIDTH: 2.781 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OVAL
•
CROSS-SECTIONAL SHAPE STYLE: METAL WINDING W/ SOFT FILLER
•
CROSS-SECTIONAL THICKNESS: 0.175 INCHES NOMINAL IN
•
APERTURE LENGTH: 3.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BEARING SURFACE WIDTH0.156 INCHES NOMINAL IN
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
APERTURE WIDTH2.781 INCHES NOMINAL IN
SPECIAL FEATURESCONTAINS NON-ASBESTOS MATERIAL
STYLE DESIGNATOROVAL
CROSS-SECTIONAL SHAPE STYLEMETAL WINDING W/ SOFT FILLER
CROSS-SECTIONAL THICKNESS0.175 INCHES NOMINAL IN
APERTURE LENGTH3.406 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
5000S5101F841218 NON-ASBESTOSInterchangeable
interchangeable cross-reference
interchangeable
803-5959278-027Interchangeable
interchangeable cross-reference
interchangeable
MIL-G-15342Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5000S5101F841218TYPE4 NON-ASBEST?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5000S5101F841218TYPE4 NON-ASBEST?
5000S5101F841218TYPE4 NON-ASBEST is a GASKET,SPIRAL WOUND.
What parts can replace 5000S5101F841218TYPE4 NON-ASBEST?
There are 3 known substitutes for 5000S5101F841218TYPE4 NON-ASBEST: 5000S5101F841218 NON-ASBESTOS, 803-5959278-027, MIL-G-15342. Substitute compatibility should be verified for your specific system.
What is the NSN for 5000S5101F841218TYPE4 NON-ASBEST?
5000S5101F841218TYPE4 NON-ASBEST is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-379-9617. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5000S5101F841218TYPE4 NON-ASBEST

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026