PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5000S5101F841218TYPE1
5000S5101F841218TYPE1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include temp_rating: 850.0 FAHRENHEIT DEGF, overall_width: 5.125 INCHES NOMINAL IN, aperture_width: 4.812 INCHES NOMINAL IN, overall_length: 5.312 INCHES NOMINAL IN, aperture_length: 5.000 INCHES NOMINAL IN, maximum_pressure_rating: 600.0 POUNDS PER SQUARE INCH (PSI) LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-186-4090, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5000S5101F841218TYPE1
NSN: 5330-00-186-4090
FSC: 5330
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
temp_rating850.0 FAHRENHEIT DEGF
overall_width5.125 INCHES NOMINAL IN
aperture_width4.812 INCHES NOMINAL IN
overall_length5.312 INCHES NOMINAL IN
aperture_length5.000 INCHES NOMINAL IN
maximum_pressure_rating600.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.175 INCHES NOMINAL IN
NSN5330-00-186-4090
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5000S5101F841218TYPE1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MAXIMUM PRESSURE RATING: 600.0 POUNDS PER SQUARE INCH (PSI) LBS
•
APERTURE WIDTH: 4.812 INCHES NOMINAL IN
•
APERTURE LENGTH: 5.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.175 INCHES NOMINAL IN
•
TEMP RATING: 850.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH5.125 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING600.0 POUNDS PER SQUARE INCH (PSI) LBS
APERTURE WIDTH4.812 INCHES NOMINAL IN
OVERALL LENGTH5.312 INCHES NOMINAL IN
APERTURE LENGTH5.000 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.175 INCHES NOMINAL IN
TEMP RATING850.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
803-5959278Interchangeable
interchangeable cross-reference
interchangeable
MIL-G-15342Interchangeable
interchangeable cross-reference
interchangeable
5000S5101F841218Interchangeable
interchangeable cross-reference
interchangeable
5000S5101F841218TYPE5Interchangeable
interchangeable cross-reference
interchangeable
5000S5101F841218TYPE2Interchangeable
interchangeable cross-reference
interchangeable
34702-0120Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5000S5101F841218TYPE1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5000S5101F841218TYPE1?
5000S5101F841218TYPE1 is a GASKET.
What parts can replace 5000S5101F841218TYPE1?
There are 9 known substitutes for 5000S5101F841218TYPE1: 803-5959278, MIL-G-15342, 5000S5101F841218 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5000S5101F841218TYPE1?
5000S5101F841218TYPE1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-186-4090. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5000S5101F841218TYPE1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026