PartsTable
Technical Data Sheet
Download PDF

5000S5101F841217TYPE6MSZ372H — CLAMP,BRIDGE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5000S5101F841217TYPE6MSZ372H: CLAMP,BRIDGE.

The CLAMP,BRIDGE is a the manufacturer industrial component. Key specifications include height: 0.625 INCHES NOMINAL IN, material: STEEL OVERALL, hole_depth: 0.625 INCHES NOMINAL IN, hole_diameter: 1.063 INCHES NOMINAL IN, overall_length: 3.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-395-2992, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5000S5101F841217TYPE6MSZ372H
NSN: 5340-00-395-2992
FSC: 5340 — Hardware, Commercial
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
height0.625 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_depth0.625 INCHES NOMINAL IN
hole_diameter1.063 INCHES NOMINAL IN
overall_length3.750 INCHES NOMINAL IN
NSN5340-00-395-2992
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5000S5101F841217TYPE6MSZ372H MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DEPTH: 0.625 INCHES NOMINAL IN
•
HEIGHT: 0.625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 1.063 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HOLE DEPTH0.625 INCHES NOMINAL IN
OVERALL LENGTH3.750 INCHES NOMINAL IN
HEIGHT0.625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER1.063 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
397-55-5-7-C HP-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3700-123Reference document
Same NSN cross-reference
Reference document — Secondary reference
NY-540-147PC357Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5000S5101F841217TYPE6MSZ372H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5000S5101F841217TYPE6MSZ372H?
5000S5101F841217TYPE6MSZ372H is a CLAMP,BRIDGE.
What parts can replace 5000S5101F841217TYPE6MSZ372H?
There are 3 known substitutes for 5000S5101F841217TYPE6MSZ372H: 397-55-5-7-C HP-3, 3700-123, NY-540-147PC357. Substitute compatibility should be verified for your specific system.
What is the NSN for 5000S5101F841217TYPE6MSZ372H?
5000S5101F841217TYPE6MSZ372H is cataloged in the U.S. Government catalog under NSN 5340-00-395-2992. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5000S5101F841217TYPE6MSZ372H