PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 500089
500089 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SANDBAG SET,CERVICAL,X-RAY is a the manufacturer industrial component. Key specifications include special_features: 12 AMPOULES AT 50 PPM (0-100PPM SCALE), end_item_identification: SENTINEL CLASS FAST RESPONSE CUTTER B (FRC-B), part_name_assigned_by_controlling_agency: CALIBRATION EQUIPMENT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-9541, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500089
NSN: 5330-00-171-9541
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
special_features12 AMPOULES AT 50 PPM (0-100PPM SCALE)
end_item_identificationSENTINEL CLASS FAST RESPONSE CUTTER B (FRC-B)
part_name_assigned_by_controlling_agencyCALIBRATION EQUIPMENT
NSN5330-00-171-9541
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 500089 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 2.686 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER2.686 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
G531Interchangeable
G531H
interchangeable
MST-MInterchangeable
interchangeable cross-reference
interchangeable
28909 1-1/8X2 TREE POINTEDInterchangeable
interchangeable cross-reference
interchangeable
50076Interchangeable
interchangeable cross-reference
interchangeable
P220Interchangeable
interchangeable cross-reference
interchangeable
20374Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 500089?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500089?
500089 is a SANDBAG SET,CERVICAL,X-RAY.
What parts can replace 500089?
There are 19 known substitutes for 500089: G531, MST-M, 28909 1-1/8X2 TREE POINTED and 16 more. Substitute compatibility should be verified for your specific system.
Is 500089 still available?
500089 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500089

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026