PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 500061
500061 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RACK,ELECTRICAL EQUIPMENT is a the manufacturer industrial component. Key specifications include material: STEEL CASE, body_width: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, case_style: SQUARE, seal_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, body_length: 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-6859, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500061
NSN: 5330-00-286-6859
FSC: 5330
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL CASE
body_width0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
case_styleSQUARE
seal_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
body_height0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
body_length0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
bulb_length11.000 INCHES NOMINAL IN
bulb_diameter0.625 INCHES NOMINAL IN
mounting_methodFLANGE
features_providedHIGH SPEED AND MONOLITHIC AND LOW POWER AND HIGH VOLTAGE AND W/ENABLE AND POSITIVE OUTPUTS
precious_materialSILVER
inclosure_materialPLASTIC
NSN5330-00-286-6859
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 500061 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 2.499 INCHES MINIMUM AND 2.501 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEAL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
HOUSING BORE DIAMETER2.499 INCHES MINIMUM AND 2.501 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
15224Interchangeable
interchangeable cross-reference
interchangeable
503-S 1Interchangeable
interchangeable cross-reference
interchangeable
44071Interchangeable
interchangeable cross-reference
interchangeable
150 1Interchangeable
interchangeable cross-reference
interchangeable
70014Interchangeable
interchangeable cross-reference
interchangeable
7122A52Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 500061?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500061?
500061 is a RACK,ELECTRICAL EQUIPMENT.
What parts can replace 500061?
There are 32 known substitutes for 500061: 15224, 503-S 1, 44071 and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 500061?
500061 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-6859. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500061

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026