PartsTable
Technical Data Sheet
Download PDF

500025-02LH-2ITEM9 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

500025-02LH-2ITEM9: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, end_item_identification: ASSEMBLY,SMALL GEAR BOX, accommodated_shaft_diameter: 0.625 INCHES NOMINAL IN, material_document_and_classification: PER ISO-6195 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL, part_name_assigned_by_controlling_agency: SEAL,LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-614-1435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500025-02LH-2ITEM9
NSN: 5330-01-614-1435
FSC: 5330 — Packing and Gasket Materials
CAGE: 98032 — TRI-TEC MANUFACTURING LLC (USA)
SPECIFICATIONS
materialSTEEL CASE
end_item_identificationASSEMBLY,SMALL GEAR BOX
accommodated_shaft_diameter0.625 INCHES NOMINAL IN
material_document_and_classificationPER ISO-6195 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencySEAL,LIP
NSN5330-01-614-1435
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 500025-02LH-2ITEM9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: PER ISO-6195 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
ACCOMMODATED SHAFT DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONPER ISO-6195 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
ACCOMMODATED SHAFT DIAMETER0.625 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL,LIP
END ITEM IDENTIFICATIONASSEMBLY,SMALL GEAR BOX
MATERIALSTEEL CASE
MATERIALRUBBER SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 1
500246Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 500025-02LH-2ITEM9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500025-02LH-2ITEM9?
500025-02LH-2ITEM9 is a SEAL,PLAIN ENCASED.
What parts can replace 500025-02LH-2ITEM9?
There is 1 known substitute for 500025-02LH-2ITEM9: 500246. Substitute compatibility should be verified for your specific system.
What is the NSN for 500025-02LH-2ITEM9?
500025-02LH-2ITEM9 is cataloged in the U.S. Government catalog under NSN 5330-01-614-1435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500025-02LH-2ITEM9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.