PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50001-2
50001-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include width: 0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, height: 0.133 INCHES NOMINAL IN, length: 0.455 INCHES MAXIMUM IN, material: ALUMINUM PUMP BASIC, body_width: 0.500 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, body_height: 0.172 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-004-2198, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50001-2
NSN: 5340-00-004-2198
FSC: 5340
CAGE: 82340 — L3HARRIS TECHNOLOGIES, INC. DIV SPACE AND AIRBORNE SYSTEMS (USA)
SPECIFICATIONS
width0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
height0.133 INCHES NOMINAL IN
length0.455 INCHES MAXIMUM IN
materialALUMINUM PUMP BASIC
body_width0.500 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
body_height0.172 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN
body_length1.490 INCHES MAXIMUM IN
charger_typeSOLID STATE SEMICONDUCTOR
hole_diameter0.112 INCHES NOMINAL IN
overall_depth5.000 INCHES NOMINAL IN
overall_width6.000 INCHES NOMINAL IN
overall_height4.250 INCHES NOMINAL IN
NSN5340-00-004-2198
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50001-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
500012Upgraded Successor
successor cross-reference
successor
450027Interchangeable
interchangeable cross-reference
interchangeable
99-12Interchangeable
interchangeable cross-reference
interchangeable
1PS462B108Interchangeable
interchangeable cross-reference
interchangeable
416204Interchangeable
interchangeable cross-reference
interchangeable
7373993Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50001-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50001-2?
50001-2 is a RESISTOR,FIXED,COMPOSITION.
What parts can replace 50001-2?
There are 13 known substitutes for 50001-2: 500012, 450027, 99-12 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50001-2?
50001-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-004-2198. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50001-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026