PartsTable
Technical Data Sheet
PartsTable / MRO / 5000-18-16
5000-18-16 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The 5000-18-16 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CONTACT, pin_length: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN, pin_diameter: 0.061 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN, overall_length: 0.418 INCHES NOMINAL IN, overall_diameter: 0.100 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN, special_features: BASIC ITEM IDENTIFICATION NUMBER BIN-100. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-402-2563, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5000-18-16
NSN: 5999-00-402-2563
FSC: 5999
CAGE: 14283 — AMPHENOL OPTIMIZE MANUFACTURING CO. DIV AMPHENOL AEROSPACE/MATRIX (USA)
SPECIFICATIONS
materialCOPPER ALLOY CONTACT
pin_length0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
pin_diameter0.061 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
overall_length0.418 INCHES NOMINAL IN
overall_diameter0.100 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
special_featuresBASIC ITEM IDENTIFICATION NUMBER BIN-100
style_designatorPIN CONTACT
precious_materialGOLD
surface_treatmentGOLD CONTACT
cable_entrance_diameter0.035 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
terminal_type_and_quantity1 CRIMP AXIALLY AT ONE END
precious_material_and_weight0.005 GOLD GRAINS, TROY
NSN5999-00-402-2563
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 5000-18-16 MFR 5000-18-16
KEY FEATURES
•
PIN DIAMETER: 0.061 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY BODY
•
PIN LENGTH: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
PRECIOUS MATERIAL AND LOCATION: EXTERNAL SURFACE GOLD
•
PRECIOUS MATERIAL AND WEIGHT: 0.005 GOLD GRAINS, TROY
•
TEST DATA DOCUMENT: 81349-MIL-C-39029 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
PRECIOUS MATERIAL: GOLD
TECHNICAL CHARACTERISTICS (FLIS)
PIN DIAMETER0.061 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY BODY
PIN LENGTH0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
PRECIOUS MATERIAL AND LOCATIONEXTERNAL SURFACE GOLD
PRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS, TROY
TEST DATA DOCUMENT81349-MIL-C-39029 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIAL FEATURESBASIC ITEM IDENTIFICATION NUMBER BIN-100
PRECIOUS MATERIALGOLD
OVERALL DIAMETER0.100 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
SURFACE TREATMENTGOLD BODY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
M39029/1-102Upgraded Successor
successor cross-reference
successor
SAE-AS39029/1Upgraded Successor
successor cross-reference
successor
7902892-00Upgraded Successor
successor cross-reference
successor
MA0-02233/128Interchangeable
interchangeable cross-reference
interchangeable
M39039/1-16-20Interchangeable
interchangeable cross-reference
interchangeable
4119405-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 5000-18-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5000-18-16?
5000-18-16 is a 5000-18-16. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5000-18-16?
There are 21 known substitutes for 5000-18-16: M39029/1-102, SAE-AS39029/1, 7902892-00 and 18 more. Substitute compatibility should be verified for your specific system.
Is 5000-18-16 still available?
5000-18-16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5000-18-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026