PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5000-15
5000-15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, duty_type: CONTINUOUS, body_width: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN, case_style: SQUARE, seal_width: 0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-2788, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5000-15
NSN: 5330-00-291-2788
FSC: 5330
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
duty_typeCONTINUOUS
body_width0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
case_styleSQUARE
seal_width0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
body_height0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
body_length0.660 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
storage_typeGENERAL PURPOSE WAREHOUSE
coil_quantity1
connection_typeTHREADED EXTERNAL PIPE SECOND END
fragility_factorMODERATELY RUGGED
special_featuresCAST ALUMINUM,DRILLED FOR USE OF AVS-60AN. TWO SPRING WITH TOP HAT CAP.IT A REGULATOR VALVE THAT ADJUSTS THE FLOW OF AIR THROUGH A CARBON VANE PUMP.
NSN5330-00-291-2788
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5000-15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
HOUSING BORE DIAMETER: 1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
CASE STYLESQUARE
SEAL WIDTH0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER0.875 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
500015Interchangeable
interchangeable cross-reference
interchangeable
61416000Interchangeable
interchangeable cross-reference
interchangeable
SN74128N00Interchangeable
interchangeable cross-reference
interchangeable
852722-1Interchangeable
interchangeable cross-reference
interchangeable
391934Interchangeable
interchangeable cross-reference
interchangeable
7036647Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5000-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5000-15?
5000-15 is a RELAY,ELECTROMAGNETIC.
What parts can replace 5000-15?
There are 18 known substitutes for 5000-15: 500015, 61416000, SN74128N00 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5000-15?
5000-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-2788. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5000-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026