PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 500-625-1325
500-625-1325 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.594 INCHES NOMINAL IN, length: 0.312 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, overall_height: 0.719 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-662-9788, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500-625-1325
NSN: 5340-00-662-9788
FSC: 5340
CAGE: 80033 — MICRODOT MFG INC PRESTOLE EVERLOCK DIV (USA)
SPECIFICATIONS
width0.594 INCHES NOMINAL IN
length0.312 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
overall_height0.719 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.016 INCHES NOMINAL IN
loop/holding_dimension0.625 INCHES NOMINAL IN
distance_from_loop_center_to_end0.328 INCHES NOMINAL IN
NSN5340-00-662-9788
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 500-625-1325 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OVERALL
•
LENGTH: 0.312 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
LOOP/HOLDING DIMENSION: 0.625 INCHES NOMINAL IN
•
WIDTH: 0.594 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.328 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OVERALL
LENGTH0.312 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
HOLE DIAMETER0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION0.625 INCHES NOMINAL IN
WIDTH0.594 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.328 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OVERALL HEIGHT0.719 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
500625Upgraded Successor
successor cross-reference
successor
23NG6A4107APC19Interchangeable
interchangeable cross-reference
interchangeable
6255Interchangeable
interchangeable cross-reference
interchangeable
DIMILIN 25 WP 200 GRInterchangeable
interchangeable cross-reference
interchangeable
K7004433-3Interchangeable
Same NIIN cross-reference
interchangeable
K7004433P3Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 500-625-1325?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500-625-1325?
500-625-1325 is a CLIP,SPRING TENSION.
What parts can replace 500-625-1325?
There are 10 known substitutes for 500-625-1325: 500625, 23NG6A4107APC19, 6255 and 7 more. Substitute compatibility should be verified for your specific system.
Is 500-625-1325 still available?
500-625-1325 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500-625-1325

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026