PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 500-516-14
500-516-14 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.194 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.490 INCHES MINIMUM AND 0.518 INCHES MAXIMUM IN, thread_length: 0.764 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN, fastener_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-2330, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500-516-14
NSN: 5305-00-013-2330
FSC: 5305
CAGE: 81352 — AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
SPECIFICATIONS
head_styleFILLISTER
head_height0.194 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.490 INCHES MINIMUM AND 0.518 INCHES MAXIMUM IN
thread_length0.764 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
fastener_length0.875 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.312 INCHES IN
screw_surface_treatmentCADMIUM OR ZINC
thread_quantity_per_inch18
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-013-2330
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 500-516-14 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2A A
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE
•
FASTENER LENGTH: 0.875 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.194 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD DIAMETER: 0.490 INCHES MINIMUM AND 0.518 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2A A
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE
FASTENER LENGTH0.875 INCHES NOMINAL IN
HEAD HEIGHT0.194 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD DIAMETER0.490 INCHES MINIMUM AND 0.518 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SCREW SURFACE TREATMENTCADMIUM OR ZINC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
54112Interchangeable
interchangeable cross-reference
interchangeable
19607NPC19Interchangeable
interchangeable cross-reference
interchangeable
N54112Interchangeable
interchangeable cross-reference
interchangeable
138401-1Interchangeable
interchangeable cross-reference
interchangeable
13084281Interchangeable
interchangeable cross-reference
interchangeable
3-606232-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 500-516-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500-516-14?
500-516-14 is a SCREW,MACHINE.
What parts can replace 500-516-14?
There are 15 known substitutes for 500-516-14: 54112, 19607NPC19, N54112 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 500-516-14?
500-516-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-2330. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500-516-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026