PartsTable
Technical Data Sheet
PartsTable / MRO / 500-3479-6
500-3479-6 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL OVERALL, body_width: 1.500 INCHES NOMINAL IN, cone_width: 1.1721 INCHES NOMINAL IN, body_height: 2.790 INCHES NOMINAL IN, bore_diameter: 1.4375 INCHES NOMINAL IN, inclosure_type: ENCASED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-9554, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 500-3479-6
NSN: 3110-00-100-9554
FSC: 3110
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width1.500 INCHES NOMINAL IN
cone_width1.1721 INCHES NOMINAL IN
body_height2.790 INCHES NOMINAL IN
bore_diameter1.4375 INCHES NOMINAL IN
inclosure_typeENCASED
overall_height4.000 INCHES NOMINAL IN
style_designatorRECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
cone_corner_radius0.0312 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
operating_voltage_rating_and_type_per_function115.0 VOLTS AC BLANK LOCATION NOT OTHERWISE SPECIFIED
NSN3110-00-100-9554
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 500-3479-6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.4375 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE WIDTH: 1.1721 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.4375 INCHES NOMINAL IN
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
CONE WIDTH1.1721 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
MIRACLEWIPEL001Interchangeable
interchangeable cross-reference
interchangeable
33S009076Interchangeable
interchangeable cross-reference
interchangeable
A-A-59323 TYPE IIInterchangeable
interchangeable cross-reference
interchangeable
2924Interchangeable
interchangeable cross-reference
interchangeable
3479Interchangeable
interchangeable cross-reference
interchangeable
DP2924Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 500-3479-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500-3479-6?
500-3479-6 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 500-3479-6?
There are 21 known substitutes for 500-3479-6: MIRACLEWIPEL001, 33S009076, A-A-59323 TYPE II and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 500-3479-6?
500-3479-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-9554. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500-3479-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026