PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 500-344
500-344 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The SHOCK ABSORBER,BUMPER is a the manufacturer industrial component. Key specifications include end_item_identification: 2310-01-171-4747, general_characteristics_item_description: BOLT MTD; TWO CONDUCTORS; AUTOMATICALLY INCREASES IDLE SPEED W/FLIP OF SWITCH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-756-1184, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
500-344
NSN: 4730-00-756-1184
FSC: 4730
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
end_item_identification2310-01-171-4747
general_characteristics_item_descriptionBOLT MTD; TWO CONDUCTORS; AUTOMATICALLY INCREASES IDLE SPEED W/FLIP OF SWITCH
NSN4730-00-756-1184
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 500-344 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B FIRST END
•
CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.812 INCHES SECOND END IN
•
LEG LENGTH: 2.850 INCHES NOMINAL SECOND END IN
•
NOMINAL WIDTH: 3.094 INCHES SECOND END IN
•
FLANGE FACE DESIGN: RAISED WITH CURVE AND COUNTERBORE SECOND END
•
MATERIAL: ALUMINUM ALLOY OVERALLUNABLE TO DECODE
•
RAISED FACE NOMINAL DIAMETER: 2.375 INCHES SECOND ENDUNABLE TO DECODE IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B FIRST END
CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.812 INCHES SECOND END IN
LEG LENGTH2.850 INCHES NOMINAL SECOND END IN
NOMINAL WIDTH3.094 INCHES SECOND END IN
FLANGE FACE DESIGNRAISED WITH CURVE AND COUNTERBORE SECOND END
SPECIAL FEATURESDRILLED FOR LOCKWIRE
MATERIALALUMINUM ALLOY OVERALLUNABLE TO DECODE
RAISED FACE NOMINAL DIAMETER2.375 INCHES SECOND ENDUNABLE TO DECODE IN
NOMINAL LENGTH3.094 INCHES SECOND END IN
BOLT HOLE NOMINAL DIAMETER0.266 INCHES SECOND END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
500-344Interchangeable
interchangeable cross-reference
interchangeable
4233Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 500-344?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 500-344?
500-344 is a SHOCK ABSORBER,BUMPER.
What parts can replace 500-344?
There are 2 known substitutes for 500-344: 500-344, 4233. Substitute compatibility should be verified for your specific system.
Is 500-344 still available?
500-344 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 500-344

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026