PartsTable
Technical Data Sheet
50-347 ✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

This smart power cable means you only need a single mains socket to connect both your monitor and your computer. A smart splitter divides the cable into two power connectors, so you avoid any unnecessary extension leads. With 2-pin mains plug.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-6369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50-347
NSN: 5330-00-291-6369
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
phaseSINGLE SINGLE VOLTAGE
length30.000 INCHES NOMINAL IN
capacity16.000 OUNCES OZ
materialSTEEL COMP 304 SHEATH
body_styleFINNED, TUBULAR, U SHAPED
case_styleSQUARE
seal_width0.437 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.219 INCHES NOMINAL SINGLE ACTUATOR IN
shaft_length0.437 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
heat_quantity1
NSN5330-00-291-6369
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50-347 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLE: SQUARE
SEAL WIDTH: 0.437 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
HOUSING BORE DIAMETER: 2.437 INCHES NOMINAL IN
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT DIAMETER: 1.188 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
SEAL WIDTH0.437 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
HOUSING BORE DIAMETER2.437 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER1.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
50380Interchangeable
interchangeable cross-reference
interchangeable
1529AInterchangeable
interchangeable cross-reference
interchangeable
60359-001Interchangeable
interchangeable cross-reference
interchangeable
60359Interchangeable
interchangeable cross-reference
interchangeable
5216Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50-347?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50-347?
50-347 is a CABLE ASSEMBLY,POWER,ELECTRICAL manufactured by Sandberg.
What parts can replace 50-347?
There are 19 known substitutes for 50-347: B94.11M, 50380, 1529A and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50-347?
50-347 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-6369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50-347