50-30-5 — LINER,FILTER,MIST COLLECTOR

✓ Government record, cited

Sandberg · MRO · MRO_GENERAL

PRODUCT OVERVIEW

50-30-5: LINER,FILTER,MIST COLLECTOR.

DVI is the successor to VGA in graphics cards and computer monitors. Whereas VGA used an analogue signal, DVI is digital and therefore produces far better picture quality. This DVI cable allows you to connect a DVI screen digitally with 24-bit maximum resolution.

The cable is double-shielded and uses ferrite cores to suppress noise and ensure optimum picture quality. This part is cataloged in the U.S. Government catalog under NSN 3120-00-287-6470, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS

MRO→ MRO_GENERAL→ 50-30-5

NSN: 3120-00-287-6470
NIINs: 002876470, 010158750, 010780818, 012868120, 013172600, 013255889, 015754545, 016983232
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 60528 — TRAILMOBILE INC SUB OF THE PULLMAN CO (USA)

SPECIFICATIONS

material	PLASTIC
corner_shape	SQUARE ALL CORNERS
overall_width	7.900 INCHES NOMINAL IN
overall_length	38.300 INCHES NOMINAL IN
hardness_rating	30.0 ROCKWELL H MINIMUM AND 70.0 ROCKWELL H MAXIMUM OVERALL
special_features	ACTION ID 45386273
style_designator	SOLID, PLAIN, NO OUTSIDE FLANGES
unit_package_type	PACKAGE
peripheral_diameter	1.512 INCHES NOMINAL IN
body_inside_diameter	1.0010 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM IN
center_hole_diameter	1.222 INCHES MINIMUM AND 1.246 INCHES MAXIMUM IN
body_outside_diameter	1.2530 INCHES MINIMUM AND 1.2540 INCHES MAXIMUM IN
NSN	3120-00-287-6470

COMPONENT DIAGRAM

KEY FEATURES

•

CORNER SHAPE: SQUARE ALL CORNERS

•

BODY OUTSIDE DIAMETER: 1.2530 INCHES MINIMUM AND 1.2540 INCHES MAXIMUM IN

•

HARDNESS RATING: 30.0 ROCKWELL H MINIMUM AND 70.0 ROCKWELL H MAXIMUM OVERALL

•

STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION

•

BODY INSIDE DIAMETER: 1.0010 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM IN

•

MATERIAL: COPPER ALLOY OVERALL

TECHNICAL CHARACTERISTICS

CORNER SHAPE	SQUARE ALL CORNERS
BODY OUTSIDE DIAMETER	1.2530 INCHES MINIMUM AND 1.2540 INCHES MAXIMUM IN
HARDNESS RATING	30.0 ROCKWELL H MINIMUM AND 70.0 ROCKWELL H MAXIMUM OVERALL
STYLE DESIGNATOR	SOLID, PLAIN, NO OUTSIDE FLANGES
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
OVERALL LENGTH	1.9925 INCHES MINIMUM AND 2.0075 INCHES MAXIMUM IN
BODY INSIDE DIAMETER	1.0010 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM IN
MATERIAL	COPPER ALLOY OVERALL
MATERIAL	OIL LUBRICATING LUBRICATION

SUBSTITUTES & CROSS-REFERENCES 8

A1232-4Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

AA1232-4Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

1706-140 PIECE 9Reference document

Same NSN cross-reference

Reference document — Secondary reference

15333PC4Reference document

Same NSN cross-reference

Reference document — Secondary reference

B1620-16Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

5173380Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 50-30-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 50-30-5?

50-30-5 is a LINER,FILTER,MIST COLLECTOR manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).

What parts can replace 50-30-5?

There are 8 known substitutes for 50-30-5: A1232-4, AA1232-4, 1706-140 PIECE 9 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 50-30-5?

50-30-5 is cataloged in the U.S. Government catalog under NSN 3120-00-287-6470. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

50-30-5 — LINER,FILTER,MIST COLLECTOR

Request a Quote — 50-30-5