PartsTable
Technical Data Sheet
Download PDF

50-20358-33 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

50-20358-33: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075, first_leg_style: SQUARE, first_leg_width: 1.500 INCHES NOMINAL IN, first_leg_length: 1.650 INCHES NOMINAL IN, second_leg_width: 1.500 INCHES NOMINAL IN, second_leg_length: 3.580 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-064-5848, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50-20358-33
NSN: 5340-01-064-5848
FSC: 5340 — Hardware, Commercial
CAGE: 23974 — CRESTVIEW AEROSPACE LLC DIV CRESTVIEW AEROSPACE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075
first_leg_styleSQUARE
first_leg_width1.500 INCHES NOMINAL IN
first_leg_length1.650 INCHES NOMINAL IN
second_leg_width1.500 INCHES NOMINAL IN
second_leg_length3.580 INCHES NOMINAL IN
mounting_hole_typeCOUNTERBORED
second_leg_thickness0.190 INCHES NOMINAL IN
first_leg_hole_diameter0.377 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
second_leg_hole_diameter0.246 INCHES NOMINAL IN
first_leg_hole_arrangement_styleONE HOLE
second_leg_hole_arrangement_styleTWO HOLES
NSN5340-01-064-5848
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50-20358-33 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.558 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.377 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
•
SECOND LEG HOLE DIAMETER: 0.246 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 1.500 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 3.580 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.558 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.377 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
SECOND LEG HOLE DIAMETER0.246 INCHES NOMINAL IN
SECOND LEG WIDTH1.500 INCHES NOMINAL IN
SECOND LEG LENGTH3.580 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.750 INCHES NOMINAL IN
FIRST LEG STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/11,T6511 FED SPEC SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 50-20358-33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50-20358-33?
50-20358-33 is a BRACKET,ANGLE.
What is the NSN for 50-20358-33?
50-20358-33 is cataloged in the U.S. Government catalog under NSN 5340-01-064-5848. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50-20358-33

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.