PartsTable
Technical Data Sheet
Download PDF

50-120091 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

50-120091: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 123.0 DEGREES NOMINAL, style_designator: OFFSET ANGLE, surface_treatment: ANODIZE, first_leg_thickness: 0.188 INCHES NOMINAL IN, second_leg_thickness: 0.188 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-515-0737, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50-120091
NSN: 5340-00-515-0737
FSC: 5340 — Hardware, Commercial
CAGE: 7EK50 — TEXTRON AVIATION INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
first_leg_angle123.0 DEGREES NOMINAL
style_designatorOFFSET ANGLE
surface_treatmentANODIZE
first_leg_thickness0.188 INCHES NOMINAL IN
second_leg_thickness0.188 INCHES NOMINAL IN
first_leg_hole_diameter0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
second_leg_hole_diameter0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleTWO HOLES
second_leg_hole_arrangement_styleTWO HOLES
material_document_and_classificationQQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE
first_leg_distance_from_edge_to_hole_center_along_width0.531 INCHES NOMINAL IN
NSN5340-00-515-0737
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50-120091 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.375 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.375 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 123.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET ANGLE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.375 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.375 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
FIRST LEG ANGLE123.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.375 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET ANGLE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.188 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 50-120091?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50-120091?
50-120091 is a BRACKET,ANGLE.
What is the NSN for 50-120091?
50-120091 is cataloged in the U.S. Government catalog under NSN 5340-00-515-0737. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50-120091

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.