PartsTable / MRO / 50-112-0
50-112-0
✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The ARRESTER,ELECTRICAL SURGE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OVERALL, barrel_style: STRAIGHT ROUND TYPE, flange_style: FLANGE, flange_width: 0.010 INCHES NOMINAL IN, washer_style: FLAT, barrel_height: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-684-5447, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO →
MRO_GENERAL →
50-112-0
NSN: 5331-00-684-5447 FSC: 5331 — O-RINGCAGE: 91816 — CIRCOR AEROSPACE, INC. DBA CIRCOR AEROSPACE INC (USA)
SPECIFICATIONS
material STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OVERALL barrel_style STRAIGHT ROUND TYPE flange_style FLANGE flange_width 0.010 INCHES NOMINAL IN washer_style FLAT barrel_height 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN special_features "G" IN THE PART NUMBER STANDS FOR GROMMET breakdown_voltage 125.000 KILOVOLTS NOMINAL surface_treatment PASSIVATE OVERALL center_hole_diameter 0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN cross-sectional_height 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN barrel_outside_diameter 0.234 INCHES MINIMUM AND 0.238 INCHES MAXIMUM IN NSN 5331-00-684-5447
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 50-112-0
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER 0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
EG-5 Interchangeable interchangeable cross-reference
interchangeable
21505 Interchangeable interchangeable cross-reference
interchangeable
918 Interchangeable interchangeable cross-reference
interchangeable
411320 Interchangeable interchangeable cross-reference
interchangeable
CA35856G-0 Interchangeable interchangeable cross-reference
interchangeable
50-112-0 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 50-112-0?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50-112-0?
50-112-0 is a ARRESTER,ELECTRICAL SURGE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50-112-0?
There are 7 known substitutes for 50-112-0: EG-5, 21505, 918 and 4 more. Substitute compatibility should be verified for your specific system.
Is 50-112-0 still available?
50-112-0 is currently cancelled.
Request a Quote — 50-112-0