PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50-10179
50-10179 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The REAMER,MACHINE is a the manufacturer industrial component. Key specifications include guide: NOT INCLUDED, diameter: 0.043 INCHES NOMINAL IN, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, flute_type: INTEGRAL, seat_angle: 37.0 DEGREES FIRST END, shank_type: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-049-1906, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50-10179
NSN: 4720-01-049-1906
FSC: 4720
CAGE: 44940 — CUMMINS POWER GENERATION INC. (USA)
SPECIFICATIONS
guideNOT INCLUDED
diameter0.043 INCHES NOMINAL IN
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
flute_typeINTEGRAL
seat_angle37.0 DEGREES FIRST END
shank_typeSTRAIGHT
reamer_typeFLUTED CHUCKING
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
flute_designSTRAIGHT
flute_length0.500 INCHES NOMINAL IN
thread_class3A FIRST END A
exterior_colorBLACK
NSN4720-01-049-1906
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 50-10179 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
NOMINAL THREAD SIZE: 0.625 INCHES FIRST END IN
•
CONNECTION STYLE: SWIVEL NUT, INVERTED FLARE FIRST END
•
CONNECTION TYPE: THREADED EXTERNAL TUBE FIRST END
•
BURST TEST PRESSURE: 1000.0 POUNDS PER SQUARE INCH LBS
•
MINIMUM INSIDE BENDING RADIUS: 3.000 INCHES IN
•
END CONNECTION DESIGN: STRAIGHT FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND FIRST END
NOMINAL THREAD SIZE0.625 INCHES FIRST END IN
CONNECTION STYLESWIVEL NUT, INVERTED FLARE FIRST END
CONNECTION TYPETHREADED EXTERNAL TUBE FIRST END
BURST TEST PRESSURE1000.0 POUNDS PER SQUARE INCH LBS
NOMINAL THREAD SIZE0.500 INCHES SECOND END IN
MINIMUM INSIDE BENDING RADIUS3.000 INCHES IN
END CONNECTION DESIGNSTRAIGHT FIRST END
THREAD SERIES DESIGNATORUNF FIRST END
THREAD CLASS3A FIRST END A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
22104Interchangeable
interchangeable cross-reference
interchangeable
GGG-R-180Interchangeable
interchangeable cross-reference
interchangeable
50-10179Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50-10179?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50-10179?
50-10179 is a REAMER,MACHINE.
What parts can replace 50-10179?
There are 3 known substitutes for 50-10179: 22104, GGG-R-180, 50-10179. Substitute compatibility should be verified for your specific system.
What is the NSN for 50-10179?
50-10179 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-049-1906. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50-10179

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026