PartsTable
Technical Data Sheet
PartsTable / MRO / 5-S-1164
5-S-1164 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: NICKEL ALLOY SEAT, body_width: 2.000 INCHES NOMINAL IN, valve_size: 5.000 INCHES IN, body_height: 1.125 INCHES NOMINAL IN, body_length: 2.000 INCHES NOMINAL IN, bonnet_type: OUTSIDE SCREW-YOKE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-287-3880, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5-S-1164
NSN: 4820-00-287-3880
FSC: 4820
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialNICKEL ALLOY SEAT
body_width2.000 INCHES NOMINAL IN
valve_size5.000 INCHES IN
body_height1.125 INCHES NOMINAL IN
body_length2.000 INCHES NOMINAL IN
bonnet_typeOUTSIDE SCREW-YOKE
flange_shapeROUND WITH HOLES ALL ENDS
body_materialMETAL
inclosure_typeHERMETICALLY SEALED
overall_length3.250 INCHES NOMINAL IN
connection_typeFLANGE ALL ENDS
special_featuresTHD MTG STUDS ON ONE SURFACE
NSN4820-00-287-3880
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 5-S-1164 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE NOMINAL DIAMETER: 0.688 INCHES FIRST END IN
•
STYLE DESIGNATOR: STRAIGHT THRU
•
BOLT CIRCLE NOMINAL DIAMETER: 7.812 INCHES FIRST END IN
•
MATERIAL: COPPER ALLOY BODY
•
FLANGE FACE DESIGN: PLAIN FIRST END
•
OPENING PRESSURE SETTING: 2.0 POUNDS PER SQUARE INCH LBS
•
MEDIA FOR WHICH DESIGNED: STEAM SINGLE RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE NOMINAL DIAMETER0.688 INCHES FIRST END IN
SPECIAL FEATURESW/HANDWHEEL FOR OPENING VALVE
STYLE DESIGNATORSTRAIGHT THRU
BOLT CIRCLE NOMINAL DIAMETER7.812 INCHES FIRST END IN
MATERIALCOPPER ALLOY BODY
FLANGE FACE DESIGNPLAIN FIRST END
OPENING PRESSURE SETTING2.0 POUNDS PER SQUARE INCH LBS
MEDIA FOR WHICH DESIGNEDSTEAM SINGLE RESPONSE
NOMINAL OUTSIDE DIAMETER9.062 INCHES FIRST END IN
OPERATING PRESSURE100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
S13-109Interchangeable
interchangeable cross-reference
interchangeable
R213840Interchangeable
interchangeable cross-reference
interchangeable
7JX65Interchangeable
interchangeable cross-reference
interchangeable
803-1385541-051Interchangeable
interchangeable cross-reference
interchangeable
5S1164Interchangeable
interchangeable cross-reference
interchangeable
803-1385541-051AFInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5-S-1164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-S-1164?
5-S-1164 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5-S-1164?
There are 6 known substitutes for 5-S-1164: S13-109, R213840, 7JX65 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5-S-1164?
5-S-1164 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-287-3880. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-S-1164

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026