PartsTable
Technical Data Sheet
PartsTable / O-RING / 5-697N674-70
5-697N674-70 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 2.863 INCHES MINIMUM AND 2.893 INCHES MAXIMUM IN, cross-sectional_height: 0.076 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-331-7230, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-697N674-70
NSN: 5331-01-331-7230
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter2.863 INCHES MINIMUM AND 2.893 INCHES MAXIMUM IN
cross-sectional_height0.076 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
NSN5331-01-331-7230
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5-697N674-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.076 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.863 INCHES MINIMUM AND 2.893 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.076 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.863 INCHES MINIMUM AND 2.893 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
115529Interchangeable
interchangeable cross-reference
interchangeable
13446Interchangeable
interchangeable cross-reference
interchangeable
145635Interchangeable
interchangeable cross-reference
interchangeable
2569Interchangeable
interchangeable cross-reference
interchangeable
488098Interchangeable
interchangeable cross-reference
interchangeable
27012700010Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5-697N674-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-697N674-70?
5-697N674-70 is a O-RING.
What parts can replace 5-697N674-70?
There are 8 known substitutes for 5-697N674-70: 115529, 13446, 145635 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5-697N674-70?
5-697N674-70 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-331-7230. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-697N674-70

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026