PartsTable
Technical Data Sheet
Download PDF

5-652 N0103-70 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5-652 N0103-70: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 0.467 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN, cross-sectional_height: 0.068 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN, end_item_identification: STRYKER, part_name_assigned_by_controlling_agency: O-RING. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-582-1543, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-652 N0103-70
NSN: 5331-01-582-1543
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER
center_hole_diameter0.467 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
cross-sectional_height0.068 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
end_item_identificationSTRYKER
part_name_assigned_by_controlling_agencyO-RING
NSN5331-01-582-1543
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5-652 N0103-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.068 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.467 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.068 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.467 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYO-RING
END ITEM IDENTIFICATIONSTRYKER
MATERIALRUBBER
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5-652 N0103-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-652 N0103-70?
5-652 N0103-70 is a O-RING.
What is the NSN for 5-652 N0103-70?
5-652 N0103-70 is cataloged in the U.S. Government catalog under NSN 5331-01-582-1543. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-652 N0103-70

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.