PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5-5162
5-5162 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The REAMER,MACHINE is a the manufacturer industrial component. Key specifications include guide: NOT INCLUDED, diameter: 0.688 INCHES NOMINAL IN, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, flute_type: INTEGRAL, shank_type: STRAIGHT, reamer_type: FLUTED CHUCKING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-3102, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-5162
NSN: 5330-00-641-3102
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
guideNOT INCLUDED
diameter0.688 INCHES NOMINAL IN
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
flute_typeINTEGRAL
shank_typeSTRAIGHT
reamer_typeFLUTED CHUCKING
flute_designHELICAL
flute_length2.250 INCHES NOMINAL IN
flute_quantity6
overall_length9.000 INCHES NOMINAL IN
shank_diameter0.5605 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
helix_directionRIGHT-HAND
NSN5330-00-641-3102
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5-5162 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 3.250 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 4.376 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER3.250 INCHES NOMINAL IN
HOUSING BORE DIAMETER4.376 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
115399Interchangeable
interchangeable cross-reference
interchangeable
35029Interchangeable
interchangeable cross-reference
interchangeable
427000P419Interchangeable
interchangeable cross-reference
interchangeable
427000PC419Interchangeable
interchangeable cross-reference
interchangeable
T8673475P419Interchangeable
interchangeable cross-reference
interchangeable
103185Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5-5162?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-5162?
5-5162 is a REAMER,MACHINE.
What parts can replace 5-5162?
There are 23 known substitutes for 5-5162: 115399, 35029, 427000P419 and 20 more. Substitute compatibility should be verified for your specific system.
Is 5-5162 still available?
5-5162 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-5162

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026