PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5-4-5106
5-4-5106 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, length: 1.313 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.172 INCHES NOMINAL IN, overall_height: 0.938 INCHES NOMINAL IN, surface_treatment: ZINC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-886-7226, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-4-5106
NSN: 5340-00-886-7226
FSC: 5340
CAGE: 81337 — W1D1 NATICK SOLDIER CENTER DBA US ARMY CCDC SOLDIER CENTER DIV COMBAT CAPABILITIES DEVELOPMENT COMMAND - SOLDIER CENTER (USA)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
length1.313 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.172 INCHES NOMINAL IN
overall_height0.938 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
material_thickness0.031 INCHES NOMINAL IN
loop/holding_dimension0.438 INCHES NOMINAL IN
NSN5340-00-886-7226
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5-4-5106 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ZINC OVERALL
•
LOOP/HOLDING DIMENSION: 0.438 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
LENGTH: 1.313 INCHES NOMINAL IN
•
WIDTH: 0.500 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.172 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTZINC OVERALL
LOOP/HOLDING DIMENSION0.438 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
LENGTH1.313 INCHES NOMINAL IN
WIDTH0.500 INCHES NOMINAL IN
HOLE DIAMETER0.172 INCHES NOMINAL IN
OVERALL HEIGHT0.938 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
C915Interchangeable
interchangeable cross-reference
interchangeable
63178Interchangeable
interchangeable cross-reference
interchangeable
MH43738Interchangeable
interchangeable cross-reference
interchangeable
A204Interchangeable
interchangeable cross-reference
interchangeable
57801Interchangeable
interchangeable cross-reference
interchangeable
225-SInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5-4-5106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-4-5106?
5-4-5106 is a CLIP,SPRING TENSION.
What parts can replace 5-4-5106?
There are 7 known substitutes for 5-4-5106: C915, 63178, MH43738 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5-4-5106?
5-4-5106 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-886-7226. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-4-5106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026