PartsTable
Technical Data Sheet
5-18-2 ✓ Verified by PartsTable
Giochi Preziosi · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Stack 10 wooden cars in this gated parking tower and top them with the sliding counter. Then see the cars drop down and the counter point to a lower number each time a car is removed from the bottom! With its imaginative design details and wonderfully simple mechanics, this clever toy is a captivating, educational way to play with sorting, matching, counting, and more! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-011-0499, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 5-18-2
NSN: 5305-00-011-0499
FSC: 5305
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
length48.000 INCHES MINIMUM AND 60.000 INCHES MAXIMUM IN
hub_typeLUER LOCK
materialRUBBER TIP
tip_typeTAPERED
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
cone_width1.8375 INCHES NOMINAL IN
head_styleSQUARE
design_typeCANE
head_height0.400 INCHES MINIMUM AND 0.444 INCHES MAXIMUM IN
thread_class2A A
bore_diameter3.1875 INCHES NOMINAL IN
coil_quantity11-1/4
NSN5305-00-011-0499
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5-18-2 · Giochi Preziosi ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
THREAD QUANTITY PER INCH: 24
THREAD DIRECTION: RIGHT-HAND
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
HEAD STYLE: ROUND
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1S STYLE
THREAD CLASS: 2A A
THREAD LENGTH: 0.375 INCHES MINIMUM IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH24
THREAD DIRECTIONRIGHT-HAND
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
HEAD DIAMETER0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
HEAD STYLEROUND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1S STYLE
THREAD CLASS2A A
THREAD LENGTH0.375 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
GGG-P-836 TY1CL1Interchangeable
interchangeable cross-reference
interchangeable
GGG-P-836Interchangeable
interchangeable cross-reference
interchangeable
730-13/16Interchangeable
interchangeable cross-reference
interchangeable
740Interchangeable
interchangeable cross-reference
interchangeable
0043012Interchangeable
interchangeable cross-reference
interchangeable
20-668Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5-18-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-18-2?
5-18-2 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by Giochi Preziosi. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5-18-2?
There are 23 known substitutes for 5-18-2: GGG-P-836 TY1CL1, GGG-P-836, 730-13/16 and 20 more. Substitute compatibility should be verified for your specific system.
Is 5-18-2 still available?
5-18-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-18-2