PartsTable
Technical Data Sheet
Download PDF

5-14-364-35-2 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5-14-364-35-2: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 1.500 INCHES NOMINAL IN, overall_height: 0.375 INCHES NOMINAL IN, outside_diameter: 3.062 INCHES NOMINAL IN, special_features: 1O EVENLY SPACED STRAIGHT TABS, style_designator: SPRING TENSION. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-692-9744, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-14-364-35-2
NSN: 5310-00-692-9744
FSC: 5310 — Nuts and Washers
CAGE: 14555 — ADVANCED INDUSTRIES, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter1.500 INCHES NOMINAL IN
overall_height0.375 INCHES NOMINAL IN
outside_diameter3.062 INCHES NOMINAL IN
special_features1O EVENLY SPACED STRAIGHT TABS
style_designatorSPRING TENSION
material_thickness0.062 INCHES NOMINAL IN
NSN5310-00-692-9744
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5-14-364-35-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPRING TENSION
•
OUTSIDE DIAMETER: 3.062 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.375 INCHES NOMINAL IN
STYLE DESIGNATORSPRING TENSION
OUTSIDE DIAMETER3.062 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
SPECIAL FEATURES1O EVENLY SPACED STRAIGHT TABS
MATERIALSTEEL OVERALL
HOLE DIAMETER1.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 4
604E17Reference document
Same NSN cross-reference
Reference document — Secondary reference
2166002Reference document
Same NSN cross-reference
Reference document — Secondary reference
1-33-311Reference document
Same NSN cross-reference
Reference document — Secondary reference
956452Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5-14-364-35-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-14-364-35-2?
5-14-364-35-2 is a WASHER,SPRING TENSION.
What parts can replace 5-14-364-35-2?
There are 4 known substitutes for 5-14-364-35-2: 604E17, 2166002, 1-33-311 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5-14-364-35-2?
5-14-364-35-2 is cataloged in the U.S. Government catalog under NSN 5310-00-692-9744. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-14-364-35-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.