PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5-13-2007-2-13
5-13-2007-2-13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, outside_diameter: 1.000 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.719 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-3825, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-13-2007-2-13
NSN: 5330-00-285-3825
FSC: 5330
CAGE: 81337 — W1D1 NATICK SOLDIER CENTER DBA US ARMY CCDC SOLDIER CENTER DIV COMBAT CAPABILITIES DEVELOPMENT COMMAND - SOLDIER CENTER (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
outside_diameter1.000 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.719 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-285-3825
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5-13-2007-2-13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 0.719 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: CELLULOSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER0.719 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIALCELLULOSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
520-SSInterchangeable
interchangeable cross-reference
interchangeable
1122531Interchangeable
interchangeable cross-reference
interchangeable
520Interchangeable
interchangeable cross-reference
interchangeable
32-104Interchangeable
interchangeable cross-reference
interchangeable
7G32534Interchangeable
interchangeable cross-reference
interchangeable
7G32104Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5-13-2007-2-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-13-2007-2-13?
5-13-2007-2-13 is a GASKET.
What parts can replace 5-13-2007-2-13?
There are 30 known substitutes for 5-13-2007-2-13: 520-SS, 1122531, 520 and 27 more. Substitute compatibility should be verified for your specific system.
Is 5-13-2007-2-13 still available?
5-13-2007-2-13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-13-2007-2-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026