PartsTable
Technical Data Sheet
Download PDF

5-13-10970-2 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5-13-10970-2: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR, material: ALUMINUM ALLOY 5052, document_type: MILITARY DRAWING, overall_width: 3.50 INCHES NOMINAL IN, overall_height: 0.93 INCHES NOMINAL IN, overall_length: 8.93 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-721-2262, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-13-10970-2
NSN: 5340-01-721-2262
FSC: 5340 — Hardware, Commercial
CAGE: 4JKJ9 — BERG MANUFACTURING, INC. (USA)
SPECIFICATIONS
shapeRECTANGULAR
materialALUMINUM ALLOY 5052
document_typeMILITARY DRAWING
overall_width3.50 INCHES NOMINAL IN
overall_height0.93 INCHES NOMINAL IN
overall_length8.93 INCHES NOMINAL IN
overall_thickness0.090 INCHES NOMINAL IN
surface_treatmentPRIMER EPOXY AND PAINT
mounting_hole_typeTHRU HOLE
mounting_hole_diameter0.375 INCHES NOMINAL IN
mounting_hole_quantity5
end_item_identification8145-01-659-8110
NSN5340-01-721-2262
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5-13-10970-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 5
•
DOCUMENT TYPE: MILITARY DRAWING
•
OVERALL THICKNESS: 0.090 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B209 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.375 INCHES NOMINAL IN
•
SHAPE: RECTANGULAR
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY5
OVERALL HEIGHT0.93 INCHES NOMINAL IN
DOCUMENT TYPEMILITARY DRAWING
OVERALL THICKNESS0.090 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B209 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.375 INCHES NOMINAL IN
SHAPERECTANGULAR
OVERALL LENGTH8.93 INCHES NOMINAL IN
OVERALL WIDTH3.50 INCHES NOMINAL IN
COLOR DOCUMENT AND CLASSIFICATIONFED-STD-595 34094 FED STD SINGLE COLOR RESPONSE
SUBSTITUTES & CROSS-REFERENCES 1
5-13-10970Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5-13-10970-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-13-10970-2?
5-13-10970-2 is a BRACKET,MOUNTING.
What parts can replace 5-13-10970-2?
There is 1 known substitute for 5-13-10970-2: 5-13-10970. Substitute compatibility should be verified for your specific system.
What is the NSN for 5-13-10970-2?
5-13-10970-2 is cataloged in the U.S. Government catalog under NSN 5340-01-721-2262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-13-10970-2